First-timer's Step-by-step Guide to Installing a New Shower Unit

Hire A Pro

The content down below relating to Simple ways to Install a Shower Cubicle on Your Own is particularly compelling. Read it yourself and decide what you think of it.


How to Build a Shower Enclosure for Your DIY Bathroom
A successful shower installation needs mindful preparation and a great deal of job. For the most part, you will certainly need to do 3 types of jobs: framing walls, installing the plumbing, and also completing walls.

Prep work


Firstly, you should pick the sort of shower that you want to set up. It is very important to ascertain whether the picked shower is capable of managing particular systems and can control a safe level of water through the boiler. A lot of shower systems nowadays are developed to be versatile to various water pressures (such as stored hot water as well as chilly keys).
It is likewise vital to take into account the water pressure as well as the planning of the piping and also drain for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be linked to the bathroom faucet based on your demand, and also the water temperature level can be adjusted through the faucets. Push-on mixers are cheap and also very simple to set up. However, although the hose pipe connection is basic, it is conveniently displaced. Furthermore, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The hose and also spray of this kind of shower are combined with a bathroom mixer tap, and the temperature level can be readjusted via the bath faucets. It is a very economical option and also no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise suffer from inconvenient temperature level control options.

  • Guidebook Mixer: The hose pipe and spray of a hands-on mixer shower unit belong of the wall surface device and the hot and cold water supplies are linked to a single shutoff The temperature level as well as stress of the water are regulated through either one or a selection of knobs (in a lot more costly showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are more pricey than the previously stated mixers. They likewise need added plumbing of hot and cold water system pipes.

  • Thermostatic Mixer: The tube and spray of this shower type belong of the wall unit and the hot and cold water materials are linked to a single shutoff right here also. It is total with a built-in stabiliser to self-adjust the water temperature and to stop it from becoming as well hot. One of the largest benefits of a thermostatic mixer shower type includes practical temperature level control. However, it is one of the most pricey of the various mixer choices.

  • Power Shower: A power shower is a solitary system having a powerful electrical pump that can changing both the water stress and also temperature. This sort of shower can be fitted if there is water from a cold water tank as well as a warm water cyndrical tube. A power shower makes the change of both pressure and also temperature level simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination boiler under keys stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and it heats the water electrically. It is necessary to note that for this shower type to be set up, the keys pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature and also stress to be adjusted via a handle. Designs with temperature stabilisers are better as they stay untouched by various other faucets in other places in use within the family. A significant disadvantage of electric showers is that the control knob just permits the option of heats at less pressure, or lower temperatures at a better pressure. This is troublesome in the winter season when the spray is typically weak and also the keys water is cooler. Nevertheless, this trouble is taken on in some models which are readily available with a winter/summer setting.

  • Approach


    Depending upon the type of shower you wish to mount, the shower head have to either be suited order to avoid its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
    Before starting, it is suggested to note the positions of the shower head and control, and to plan the pipe-work included. Additionally, the drainage system to eliminate the drainage will require to be intended. Both placements of the cable television route and the shower switch will additionally need to be considered if an instant or electrical shower device is being mounted.
    Use the guideline overview supplied with the shower unit to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is essential to cut off the supply of water. In order to safeguard the pipelines, they need to be offered a water resistant covering as well as additionally fitted with separating valves. The pipelines can after that be hidden into the wall surface and also glued over to neaten the general look.
    Fit the base tray, shower head, and fittings.
    Connect the main shower control to the pipelines that will be supplying the water (This may call for a women screw string adapter).
    Reconnect the supply of water as well as test the pipelines for any leaks, as some may require firm.
    If you are setting up an electrical shower, remember to switch off the electricity supply prior to making any type of electric links. Once these connections have been made (there must be assistance within the instruction manual), the power supply can be switched back on.

    Readjusting Water Pressure to Suit Your Shower


    The cold water tank can be raised to a greater height (sometimes as little as 150mm (6inches)) by installation a solid wood support beneath it - perhaps composed of struts and blockboards. If you pick this choice, the main as well as circulation pipes will certainly likewise have to be increased to satisfy the new elevation of the reservoir.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be connected into the power supply in order to run.

    Piping and Drain


    It is best to utilize 15mm diameter supply pipes, and also make the go to the shower as short and also straight as feasible so regarding maintain optimal stress and reduce warmth loss. In addition, by minimising the use of joints for pipe edges, you can reduce the resistance in the circulation of the supply of water. You can achieve this by flexing the pipes instead.

    A Lot Of Typical Mistakes


  • Violating or neglecting neighborhood code restrictions.

  • Using pipelines that are also little.

  • Attaching copper to galvanized without utilizing a brass or dielectric fitting in between both.

  • Not making use of tape or pipe compound at threaded joints.

  • Not leveling your components when installing them.

  • Not mounting an air void filling up for components.

  • Reducing supply stub outs also brief to mount the shutoff valves onto after the completed wall surface is in area.

  • Not effectively lining up tubing into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will create a leak.).

  • When transforming the water back on in your home, constantly run the outside pipe valve or purge your bathrooms to hemorrhage dirt and also air from the lines. This particles can cause issues in your sink faucets and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Freestanding Shower Unit

    As a keen reader about Simple ways to Install a Shower Cubicle on Your Own, I thought sharing that piece of content was smart. Sharing is nice. Helping others is fun. We enjoy reading our article about How to Install a Shower Enclosure .


    Request Free Estimate

    Leave a Reply

    Your email address will not be published. Required fields are marked *